18-Mode, Rapid Fire Stealth Mod Kit for Xbox 360 Controller

This listing is for a 18-mode mod kit for a Official Microsoft Xbox 360 wireless controller, this will not work with any other controller. Details listed below:

This is a stealth mod, to change modes, quickly press not hold the sync button.

**Please note, there is a known problem with Matrix 2 boards, if your controller is firing by itself, please disconnect the left trigger from the mod.

• Mode 1: 8sps (dual rapid fire)
• Mode 2: 11sps (dual rapid fire)
• Mode 3: 14sps (dual rapid fire)
• Mode 4: 16sps (dual rapid fire)
• Mode 5: 19sps (dual rapid fire)
• Mode 6: 22sps (dual rapid fire)
• Mode 7: 25sps (dual rapid fire)
• Mode 8: 30sps (dual rapid fire)
• Mode 9: 7sps
• Mode 10: 8sps
• Mode 11: 15sps
• Mode 12: 17sps
• Mode 13: 19sps
• Mode 14: 22sps
• Mode 15: 25sps
• Mode 16: 30sps
• Mode 17: 35sps
• Mode 18: 50sps

When you change modes, the LED will blink as many times as the mode in which you are ... example, if you are in 5, the LED flashes 5 times.

For modes above 10 then the LED will flash the number of times 10. Example: you are 14 and mode switching into 15, the LED flashes 5 times.

By pressing the button longer "Sync", you switch to "Standby", the Rapidfire is disabled (the LED will flash rapidly) , to get back again on the current mode simply press the "Sync" button, the mod will go back into the mode you were just in.

Please note while online, all these speeds may not work with some games because of the patches.

This mod kit contains the following:

• Programmed chip
• Two feet of 30 Awg wire
• 1N4148 diode (for older version controller only)
• A QR Code with a link to the PDF (instructions and a video link) will be attached to the envelope

**Also please watch the video, this is what the 18-mode kit does when installed, properly, please note this is a video of the 3-mode kit, the 18 just has 15 more modes.**

If you have any questions, Please Ask